After good success with the F330, we moved on to the F450 and our first attempt at the KK2 (specifically the KK2.1.5) with all parts that were 2 years old and never powered up from the abandoned Arduino. The motors, esc were all reused.
The Best Hobby Mall’s Night Hawk 250 was our first venture into 250mm class quads. It had a nice introduction price of $39.99 USD with free shipping and it’s really non nonsense free shipping. We got it shipped to Singapore.
Rebuild it and flown it with a Hobbyking Naze 32 (This is the soldered horizontal pins version. There is a vertical pin version and a no pins version). Great fun as well. Picked up a pack of spare accessories that consists of all the bolt, nuts and blue rubber thingy as well.
The ESCs didn’t like being cramped together and we learn the hard way. It just never flew properly. After one ESC discarded and all moved to the arms later, we were flying again.
Rebuild 1 – 15 Sept 2014
It never flew properly on a KK2.1.5, gave up and anxious to fly it, swop to a DJI Naza M Lite with GPS. yes, a little crazy with the GPS and all but it flew great!
A photo posted by =In The Course Of Work= (@itcow) on
The Nighthawk 250 has another change and it’s to Naze32 this time. We picked up the Naze32 from Hobbyking. Bluetooth What you must buy, repeat MUST, when you get the Naze32 is the Bluetooth module and while at it, pick up a buzzer too, we reuse the one from our KK2 board. Once flying stable on default PID, all you need to do is change the rate for roll, pitch and yaw. Here’s ours, change from 0 to 0.50 then finally to 0.8 and you’ll be flipping with great fun without loose altitude. Android Apps