Was looking at loading more things on the DJI F330 when we were rebuilding the F330 for the 3rd time recently and came across this thread by Theone420. We contacted our local, Singapore workshop and yes, they can do it.
and so, here’s “The Flying Flea”.
We chose to make it in 0.5mm thick ply wood and for fun, an acrylic one.
Weighing it, 74.2grams
As stated in that thread, the DXF comes with 0.9mm screw holes and comes as a guide. You can choose what size you need. We went with the original 2.5mm but the original screws of M2.5 x 6 won’t be long enough. We went with M2.5 x 8.
Draft assembly with the F330 arms.
Weighing it again. 172.8grams with arms.
Size compare with the DJI F330.
The acrylic one.
With lotsa space to mount the ESC within the frame.
Used the DJI Naza M V2 with GPS on this.
Size compare with the DJI F330.
It flew great.
– Gains if you wanna know. 110, 110, 100, 100, 129 and 120.
– Flying Flea with F330 arms x 4
– 4 x 30A DJI Opto
– 4 x DJI 2212 920kv motors
– myrcmart 1 to 8 Power Distribution board
– FrSky D8R-XP
– Turnigy 3S 2650 mah
– Boscam 600mw Transmitter
– Gopro 3